l2tp slot block enable

Function

The l2tp slot block enable command enables the block function for the tunnel board.

The undo l2tp slot block enable command disables the block function from the tunnel board.

By default, the block function is disabled from tunnel boards.

This command is supported only on the NetEngine 8000 F1A.

Format

l2tp slot slot-id block enable

undo l2tp slot slot-id block enable

Parameters

Parameter	Description	Value
slot-id	Specifies the slot where the tunnel board is inserted.	The value is an integer that ranges from 1 to 16.

Parameter

Description

Value

slot-id

Specifies the slot where the tunnel board is inserted.

The value is an integer that ranges from 1 to 16.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

If the number of tunnels established on a tunnel board reaches the upper limit, you can enable the block function for the tunnel board. Then, L2TP tunnels cannot be established on the tunnel board.

Example

# Enable the block function for the tunnel board in slot 1.

<HUAWEI> system-view
[~HUAWEI] l2tp slot 1 block enable