The link-protocol forwarding command configures all interfaces of a device to forward specified packets.
The undo link-protocol forwarding command deletes the configuration of the link-protocol forwarding command to restore the original packet processing mode. Originally, interfaces of a device discard specified packets.
By default, interfaces of a device discard link-oam, eoam3ah, e-lmi, and ptp-peer-delay packets.
| Parameter | Description | Value |
|---|---|---|
| eoam3ah |
Configures interfaces to forward Layer 2 control protocol packets eoam3ah. |
- |
| e-lmi |
Configures interfaces to forward Layer 2 control protocol packets e-lmi. |
- |
| ptp-peer-delay |
Configures interfaces to forward Layer 2 control protocol packets ptp-peer-delay. |
- |
| link-oam |
Configures interfaces to forward Layer 2 control protocol packets link-oam. |
- |
Usage Scenario
You can run this command to configure all interfaces of a device to forward specified packets. The command run in the system view to configure interfaces to forward packets of a specified protocol has higher priority than that run in the interface view to configure interfaces to transparently transmit packets of the protocol.