local-bill-pool enable

Function

The local-bill-pool enable command creates a local bill pool.

The undo local-bill-pool enable command restores the default configuration.

By default, no local bill pool is created.

This command is supported only on the NetEngine 8000 F1A.

local-bill-pool enable

undo local-bill-pool enable

None

Local AAA server view

2: Configuration level

Task Name	Operations
aaa-access	write

If a RADIUS server is configured to implement the accounting for access users or value-added services, the

Router allows the generation of local bills under the following scenarios:

An accounting stop request is triggered by a user or value-added service, but the RADIUS server does not respond. In this case, the Router generates a local bill to record the accounting information and considers that the user is offline.
The accounting start-fail online command is run to allow a user to go online even if accounting fails to start for the user. When users go offline, local bills can be created to record accounting information.
Local bills can be transferred to a bill server for account reconciliation on the RADIUS server. To allow the generation of local bills, run the local-bill-pool enable command to create a local bill pool.

# Create a local bill pool.

<HUAWEI> system-view
[~HUAWEI] local-aaa-server
[~HUAWEI-local-aaa-server] local-bill-pool enable