management-acl disable

Function

The management-acl disable command disables the management protocol ACL delivering function.

The undo management-acl disable command restores the default settings.

By default, the management protocol ACL delivering function is enabled.

Format

management-acl disable

undo management-acl disable

Parameters

None

Views

Attack defense policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
cpu-defend	write

Usage Guidelines

Usage Scenario

The management-acl disable command is effective for FTP, Telnet, SSH, and SNMP. When there is no need to filter out invalid management protocol packets to be sent to the CPU using hardware, run the management-acl disable command to disable the management protocol ACL delivering function. For example, if the ACL of the ftp protocol has been configured and the command line management-acl disable is configured, the ACL of the ftp protocol will no longer take effect.

Configuration Impact

This command controls ACL filtering on the forwarding plane, and does not affect functions on the control plane.

In VS mode, this command is supported only by the admin VS.

Example

# Disable the management protocol ACL delivering function in attack defense policy 6.

<HUAWEI> system-view
[~HUAWEI] cpu-defend policy 6
[*HUAWEI-cpu-defend-policy-6] management-acl disable