map rule (System view)

Function

The map rule command creates a basic mapping rule (BMR) and displays the BMR view.

The undo map rule command deletes a BMR.

By default, no BMR is created.

This command is supported only on the NetEngine 8000 F1A.

Format

map rule rule-name

undo map rule rule-name

Parameters

Parameter Description Value
rule-name

Specifies a BMR name.

The value is a string of 1 to 31 characters.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
map write

Usage Guidelines

Usage Scenario

When the MAP-T or MAP-E function is configured, to set a BMR, run the map rule command. A maximum of 4096 BMRs can be configured on each device.

Precautions

BMRs can be referenced by DHCPv6 address pools, and referenced BMRs cannot be modified.

Example

# Create a BMR named test and access the BMR view.
<HUAWEI> system-view
[~HUAWEI] map rule test
Parent Topic: MAP Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >