display service-security statistics ipv6

Format

display service-security statistics ipv6 [ security-policy-name ]

Parameters

Parameter	Description	Value
security-policy-name	Specifies the name of an MPAC policy.	The value is a string of 1 to 31 case-sensitive characters without spaces and must start with a letter.

Parameter

Description

Value

security-policy-name

Specifies the name of an MPAC policy.

The value is a string of 1 to 31 case-sensitive characters without spaces and must start with a letter.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ip-stack	read

Usage Guidelines

Usage Scenario

MPAC policies can be configured to filter packets to be sent to the CPU, thereby helping protect devices against various types of attacks.

The display service-security statistics ipv6 command displays statistics about matched rules in IPv6 MPAC policies.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display statistics about matched rules in all IPv6 MPAC policies.

<HUAWEI> display service-security statistics ipv6
Policy Name : huawei                                                            
Step        : 5                                                                 
 rule 5 permit ipv6-ext-header source-routing-type srh (0 times matched)

**Table 1** Description of the **display service-security statistics ipv6** command output
Item	Description
Policy Name	Name of an MPAC policy.
Step	Step of an MPAC policy.
rule	Rules in an MPAC policy.
times matched	Times that the rule is matched.