The multicast inband-signaling mldp command enables mLDP in-band MVPN.
The multicast inband-signaling mldp command enables mLDP in-band MVPN and MVPN fast reroute (FRR).
The undo multicast inband-signaling mldp command restores the default configuration.
By default, mLDP In-Band MVPN is disabled.
Usage Scenario
mLDP In-Band MVPN is an MVPN technology that uses mLDP in-band signaling to transmit PIM SM /PIM SSM join information and uses mLDP to carry multicast and unicast services in the same VPN architecture. To enable mLDP in-band MVPN, run this command.
mLDP In-Band MVPN also support MVPN fast reroute (FRR). run the multicast inband-signaling mldp frr command to enable VPN FRR so that VPN multicast traffic can be imported to the primary and backup tunnels.Precautions
mLDP in-band MVPN configurations and NG MVPN configurations are mutually exclusive. After mLDP in-band MVPN is configured, NG MVPN cannot be configured.
mLDP in-band MVPN configurations and Rosen configurations are mutually exclusive. After mLDP in-band MVPN is configured, Rosen cannot be configured. mLDP in-band MVPN configurations and Extranet configurations are mutually exclusive. After mLDP in-band MVPN is configured, Extranet cannot be configured.<HUAWEI> system-view [~HUAWEI] ip vpn-instance vrf1 [~HUAWEI-vpn-instance-vrf1] ipv4-family [*HUAWEI-vpn-instance-vrf1-af-ipv4] route-distinguisher 2:2 [*HUAWEI-vpn-instance-vrf1-af-ipv4] vpn-target 1:1 both [*HUAWEI-vpn-instance-vrf1-af-ipv4] multicast routing-enable [*HUAWEI-vpn-instance-vrf1-af-ipv4] multicast inband-signaling mldp
<HUAWEI> system-view [~HUAWEI] ip vpn-instance vrf1 [~HUAWEI-vpn-instance-vrf1] ipv4-family [*HUAWEI-vpn-instance-vrf1-af-ipv4] route-distinguisher 2:2 [*HUAWEI-vpn-instance-vrf1-af-ipv4] vpn-target 1:1 both [*HUAWEI-vpn-instance-vrf1-af-ipv4] multicast routing-enable [*HUAWEI-vpn-instance-vrf1-af-ipv4] multicast inband-signaling mldp frr