The multicast bas-policy out enable interface gigabitethernet command enables user-side multicast CAC on a specific interface board.
The undo multicast bas-policy out enable interface gigabitethernet command disables user-side multicast CAC on a specific interface board.
By default, user-side multicast CAC is disabled on an interface board.
This command is supported only on the NetEngine 8000 F1A.
Usage Scenario
After user-side multicast CAC is configured in the system view, run the multicast bas-policy out enable command to enable user-side multicast CAC on the target interface board.
Precautions
This command must be used together with the multicast bas-policy out bandwidth level-1 interface GigabitEthernet command in the AAA domain view or the multicast bas-policy out bandwidth level-1 command in the physical interface view.
The multicast bas-policy out enable command can be run either before or after the preceding command in the AAA domain or physical interface view. The multicast bas-policy out enable command configuration is effective only for GE interfaces on the interface board.This command is supported only on the admin VS.
<HUAWEI> system-view [~HUAWEI] slot 1 [*HUAWEI-slot-1] multicast bas-policy out enable interface GigabitEthernet [*HUAWEI-slot-1] quit [*HUAWEI] multicast bas-policy [*HUAWEI-multicast-bas-policy] policy policy1 [*HUAWEI-multicast-bas-policy-policy1] quit [*HUAWEI-multicast-bas-policy] quit [*HUAWEI] interface GigabitEthernet 0/1/8 [*HUAWEI-GigabitEthernet0/1/8] multicast bas-policy policy1 out bandwidth 10000 level-1 8000 [*HUAWEI-GigabitEthernet0/1/8] quit [*HUAWEI] aaa [*HUAWEI-aaa] domain huawei [*HUAWEI-aaa] commit [*HUAWEI-domain-huawei] multicast bas-policy policy1 out bandwidth 10000 level-1 8000 interface GigabitEthernet