multicast-nat bind-list

Function

The multicast-nat bind-list command creates and displays the multicast NAT binding view.

The undo multicast-nat bind-list command deletes the multicast NAT binding view and the configurations in the view.

By default, no multicast NAT binding view is created.

This command is supported only on the NetEngine 8000 F1A.

Format

multicast-nat bind-list

undo multicast-nat bind-list

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
forwarding	write

Usage Guidelines

Usage Scenario

In multicast NAT, to translate an input multicast stream into output multicast streams, you must create a multicast NAT instance. Before binding output multicast streams to a multicast NAT instance, you must run the multicast-nat bind-list command to create and enter the multicast NAT binding view.

Prerequisites

Multicast NAT has been globally enabled using the multicast-nat enable command.

Follow-up Procedure

Run the multicast-nat outbound command to bind output multicast streams to the multicast NAT instance.

Precautions

This command is supported only in the admin VS.

Example

# Create and display the multicast NAT binding view.

<HUAWEI> system-view
[~HUAWEI] multicast-nat enable
[*HUAWEI] multicast-nat bind-list