multicast-nat clean-switch interval

Function

The multicast-nat clean-switch interval command configures the interval between two adjacent multicast NAT clean switching commands.

The undo multicast-nat clean-switch interval command restores the multicast NAT clean switching interval to the default value .

By default, the interval between two adjacent multicast NAT clean switching commands is 500 ms.

This command is supported only on the NetEngine 8000 F1A.

Format

multicast-nat clean-switch interval interval-value

undo multicast-nat clean-switch interval

Parameters

Parameter	Description	Value
interval-value	Specifies the interval between two adjacent multicast NAT clean switching commands.	The value is an integer that ranges from 300 to 500 ms.

Parameter

Description

Value

interval-value

Specifies the interval between two adjacent multicast NAT clean switching commands.

The value is an integer that ranges from 300 to 500 ms.

Views

multicast-nat-bind-list

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
forwarding	write

Usage Guidelines

Usage Scenario

In multicast NAT, to translate an input multicast stream into output multicast streams, you must create a multicast NAT instance. The binding between the output multicast streams and the multicast NAT instance must be configured. To implement frequent clean switching for multicast streams, run this command to set the interval between two adjacent multicast NAT clean switching commands.

Prerequisites

Multicast NAT has been globally enabled using the multicast-nat enable command.

The multicast NAT binding view has been displayed using the multicast-nat bind-list command.

Precautions

If the interval between two adjacent multicast NAT clean switching commands is less than 500 ms, artifacts may occur during clean switching.

Example

# Configure the interval between two adjacent multicast NAT clean switching commands in the multicast NAT binding view.

<HUAWEI> system-view
[~HUAWEI] multicast-nat enable
[*HUAWEI] multicast-nat bind-list
[*HUAWEI-multicast-nat-bind-list] multicast-nat clean-switch interval 300