nat64 user-session create-rate limit enable

Function

The nat64 user-session create-rate limit enable command enables the limitation on the rate at which packets are sent to create a flow on a NAT64 device.

The undo nat64 user-session create-rate limit enable command disables the limitation on the rate at which packets are sent to create a flow on a NAT64 device.

The limitation on the rate at which packets are sent to create a flow on a NAT64 device is enabled by default.

This command is supported only on the NetEngine 8000 F1A.

Format

nat64 user-session create-rate limit enable

undo nat64 user-session create-rate limit enable

Parameters

None

Views

NAT64 instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

The limitation on the rate at which packets are sent to create a flow on a NAT64 device is enabled by default. To disable this function, run the undo nat64 user-session create-rate limit enable command.

Follow-up Procedure

Run the nat64 user-session create-rate command to set the rate at which packets are sent to create flow tables in a NAT64 instance.

Example

# Disable the limitation on the rate at which packets are sent to create a flow in a NAT64 instance named nat1 on a NAT64 device.

<HUAWEI> system-view
[~HUAWEI] nat64 instance nat1 id 1
[*HUAWEI-nat64-instance-nat1] undo nat64 user-session create-rate limit enable