nat alarm vsu-service-fault

Function

The nat alarm vsu-service-fault disable command disables the service fault log or alarm function of a board.

The undo nat alarm vsu-service-fault disable command restores the service fault log or alarm function of a board.

By default, the alarm and log functions are enabled for service faults on a board.

This command is supported only on the NetEngine 8000 F1A.

Format

nat alarm vsu-service-fault alg-resource-exhaust { log | trap } disable

undo nat alarm vsu-service-fault alg-resource-exhaust { log | trap } disable

Parameters

Parameter	Description	Value
log	Log information.	-
trap	Trap information.	-
alg-resource-exhaust	Indicates the ALG resource exhaustion alarm.	-

Parameter

Description

Value

log

Log information.

trap

Trap information.

alg-resource-exhaust

Indicates the ALG resource exhaustion alarm.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

By configuring the board service alarm function on service board, you can determine whether to send alarms and logs when a service board fails. Check whether alarm clearance and logs are sent after the service fault is rectified.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Disable the alarm function for the ALG resource exhaust failure on the board.

<HUAWEI> system-view
[~HUAWEI] nat alarm vsu-service-fault alg-resource-exhaust trap disable