npe-upe mac-withdraw enable

Function

The npe-upe mac-withdraw enable command configures an NPE to forward the LDP MAC Withdraw messages received from other NPEs to UPEs.

The undo npe-upe mac-withdraw enable command disables an NPE from forwarding the LDP MAC Withdraw messages received from other NPEs to UPEs.

By default, an NPE does not forward the LDP MAC Withdraw messages received from other NPEs to UPEs.

Format

npe-upe mac-withdraw enable

undo npe-upe mac-withdraw enable

Parameters

None

Views

VSI-LDP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

This command is mainly used on the gateway on the Metro Ethernet where:

NPE refers to the network end peer of the local VSI in HVPLS. You can run the peer peer-address [ negotiation-vc-id vc-id ] [ tnl-policy policy-name ] command to specify an NPE.
UPE refers to the user end peer of the local VSI in HVPLS. You can run the peer peer-address [ negotiation-vc-id vc-id ] [ tnl-policy policy-name ] upe command to specify a UPE.
If the local device is not configured with HVPLS, the npe-upe mac-withdraw enable command is not required.

Example

# Configure the NPE to forward the LDP MAC Withdraw messages received from other NPEs to the UPE.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi v1 static
[*HUAWEI-vsi-v1] pwsignal ldp
[*HUAWEI-vsi-v1-ldp] npe-upe mac-withdraw enable