nqa twamp-light

Function

The nqa twamp-light command creates a TWAMP Light service and displays the TWAMP Light view. If the service specified in the nqa twamp-light command has been created, the command displays the TWAMP Light view.

The undo nqa twamp-light command deletes a TWAMP Light service.

By default, no TWAMP Light service is created.

Format

nqa twamp-light

undo nqa twamp-light

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
twampclient write

Usage Guidelines

Usage Scenario

TWAMP Light, as a light version of TWAMP, simplifies the control protocol used to establish test sessions and measures the round-trip network performance. To create a TWAMP Light service, run the nqa twamp-light command.

Precautions

After the undo nqa twamp-light command is run to delete a TWAMP Light service, the Client, Session-Sender, and all related sessions and statistics are deleted.

Example

# Create a TWAMP Light service.
<HUAWEI> system-view
[~HUAWEI] nqa twamp-light
[*HUAWEI-twamp-light]
Parent Topic: TWAMP Light Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >