one-way delay-measure enable

Function

The one-way delay-measure enable command enables the TWAMP Light one-way delay measurement service.

The undo one-way delay-measure enable command disables the TWAMP Light one-way delay measurement service.

By default, TWAMP Light one-way frame delay measurement is disabled.

one-way delay-measure enable

undo one-way delay-measure enable

None

TWAMP-light view

2: Configuration level

Task Name	Operations
twampclient	write

Usage Scenario

The standard TWAMP protocol supports only two-way delay measurement. You can run this command to enable one-way delay measurement for TWAMP Light.

Precautions

After the undo one-way delay-measure enable command is run, the platform does not save or collect statistics about one-way delay measurement.

# Disable the TWAMP Light one-way frame delay measurement service.

<HUAWEI> system-view
[~HUAWEI] nqa twamp-light
[*HUAWEI-twamp-light] undo one-way delay-measure enable

# Enable the TWAMP Light one-way frame delay measurement service.

<HUAWEI> system-view
[~HUAWEI] nqa twamp-light
[*HUAWEI-twamp-light] one-way delay-measure enable