option82-identify include static-user

Function

The option82-identify include static-user command inserts Option 82 for static users.

The undo option82-identify include static-user command removes Option 82 from static users.

By default, static user packets do not carry Option 82.

This command is supported only on the NetEngine 8000 F1A.

Format

option82-identify include static-user

undo option82-identify include [ static-user ]

Parameters

Parameter	Description	Value
static-user	Indicates static users.	-

Parameter

Description

Value

static-user

Indicates static users.

Views

BAS interface view (FE), BAS interface view (GE), BAS interface view (VE), BAS interface view (trunk)

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

After a QoS profile is applied to a BAS interface and different identification modes are specified for different users, static users cannot be identified using any of the identification modes but can be identified by Option 82. To allow the BAS interface to add Option 82 to static user packets to identify the static users, run the option82-identify include static-user command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Add Option 82 for static users on Eth-Trunk 2.

<HUAWEI> system-view
[~HUAWEI] interface eth-trunk 2
[*HUAWEI-Eth-Trunk2] commit
[~HUAWEI-Eth-Trunk2] bas
[~HUAWEI-Eth-Trunk2-bas] option82-identify include static-user