ospfv3 suppress-flapping interface disable

Function

The ospfv3 suppress-flapping interface disable command disables OSPFv3 interface flapping suppression.

The undo ospfv3 suppress-flapping interface disable command enables OSPFv3 interface flapping suppression.

By default, OSPFv3 interface flapping suppression is enabled.

Format

ospfv3 suppress-flapping interface disable

undo ospfv3 suppress-flapping interface disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

If OSPFv3 interfaces frequently alternate between up and down, the interfaces will flap, and protocol packets will be frequently exchanged, affecting OSPFv3 services. To address this issue, run the undo ospfv3 suppress-flapping interface disable command to enable interface flapping suppression. This function allows a device to delay interface state changes to up.

By default, interface flapping suppression is enabled globally for all OSPFv3 interfaces. If this function is not needed, run the ospfv3 suppress-flapping interface disable command to disable it.

Example

# Disable OSPFv3 interface flapping suppression.

<HUAWEI> system-view
[~HUAWEI] ospfv3 suppress-flapping interface disable