bandwidth (MPLS TE P2MP template view)

Function

The bandwidth command sets the CT0 bandwidth for an automatic P2MP TE tunnel.

The undo bandwidth command deletes the CT0 bandwidth for an automatic P2MP TE tunnel.

By default, no CT0 bandwidth is set for an automatic P2MP TE tunnel.

Format

bandwidth ct0 bw-value

undo bandwidth ct0

Parameters

Parameter	Description	Value
ct0 bw-value	Specifies the CT0 bandwidth.	The value is an integer ranging from 1 to 4000000000, in kbit/s.

Parameter

Description

Value

ct0 bw-value

Specifies the CT0 bandwidth.

The value is an integer ranging from 1 to 4000000000, in kbit/s.

Views

MPLS TE P2MP template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

Before bandwidth protection is provided for traffic transmitted along an automatic P2MP TE tunnel, run the bandwidth command to set the CT0 bandwidth for the tunnel. Nodes on the P2MP TE tunnel can then reserve bandwidth for services, which implements bandwidth protection.

Prerequisites

A P2MP tunnel template has been configured using the mpls te p2mp-template command.

Example

# Set the CT0 bandwidth for an automatic P2MP TE tunnel to 2000 kbit/s.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] mpls te p2mp-te
[*HUAWEI-mpls] quit
[*HUAWEI] mpls te p2mp-template Template1
[*HUAWEI-te-p2mp-template-Template1] bandwidth ct0 2000