reoptimization (MPLS TE P2P template view)

Format

reoptimization [ frequency interval ]

undo reoptimization

Parameters

Parameter	Description	Value
frequency interval	Specifies the interval between periodic re-optimization processes. A CR-LSP is recalculated at a specified interval based on constraints. If a better path to the same destination is calculated, a CR-LSP is re-established over the new path.	The value is an integer ranging from 60 to 604800, in seconds. By default, the interval is 3600 seconds, namely, 1 hour.

Parameter

Description

Value

frequency interval

Specifies the interval between periodic re-optimization processes. A CR-LSP is recalculated at a specified interval based on constraints. If a better path to the same destination is calculated, a CR-LSP is re-established over the new path.

The value is an integer ranging from 60 to 604800, in seconds. By default, the interval is 3600 seconds, namely, 1 hour.

Views

MPLS TE P2P template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

Periodic re-optimization allows an MPLS TE tunnel to be automatically reestablished over a better path. After a better path to the same destination has been calculated for a specific reason, such as a cost change, a TE tunnel will be automatically reestablished, optimizing resources on a network.

Prerequisites

A P2P TE tunnel template has been configured using the mpls te p2p-template command.

Example

# Enable periodic re-optimization for an automatic P2P TE tunnel.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] mpls te p2p-template Template1
[*HUAWEI-te-p2p-template-Template1] reoptimization