reset counters auto-primary-tunnel

Function

The reset counters auto-primary-tunnel command is used to clear traffic statistics of MPLS TE tunnels.

Format

reset counters [ if-mib ] auto-primary-tunnel tunnelName

Parameters

Parameter	Description	Value
if-mib	Designated IF-MIB interface statistics.	-
tunnelName	MPLS TE tunnel automatically name.	The value is a string of 1 to 63 case-sensitive characters.

Parameter

Description

Value

if-mib

Designated IF-MIB interface statistics.

tunnelName

MPLS TE tunnel automatically name.

The value is a string of 1 to 63 case-sensitive characters.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

Before a statistical traffic information automatically MPLS TE tunnel within a certain period of time, it must clear the existing statistics of the tunnel before the start of the statistics, the tunnel re-count.

Precautions

After the display mpls te tunnel traffic-statistics command is run,traffic statistics are reset to 0 and cannot be restored. Therefore, confirm the action before you run the reset counters auto-primary-tunnel command.

Example

# Clear the traffic statistics of Auto Tunnel 32760.

<HUAWEI> reset counters auto-primary-tunnel Auto Tunnel32760