passive-session detect-multiplier

Function

The passive-session detect-multiplier command changes the detection multiplier of a passive BFD session.

The undo passive-session detect-multiplier restores the default detection multiplier of a passive BFD session.

By default, the detection multiplier of a passive BFD session is 3.

Format

passive-session detect-multiplier multiplier-value peer peerip-value

undo passive-session detect-multiplier multiplier-value peer peerip-value

Parameters

Parameter	Description	Value
multiplier-value	Specifies the detection multiplier of a passive BFD session.	The value is an integer ranging from 3 to 50.
peer peerip-value	Specifies the peer IP address bound to a passive BFD session.	The value is in dotted decimal notation.

Parameter

Description

Value

multiplier-value

Specifies the detection multiplier of a passive BFD session.

The value is an integer ranging from 3 to 50.

peer peerip-value

Specifies the peer IP address bound to a passive BFD session.

The value is in dotted decimal notation.

Views

BFD view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bfd	write

Usage Guidelines

Usage Scenario

In the case of BFD for MPLS-TE, you can run the passive-session detect-multiplier command to change the detection multiplier of a passive BFD session with the specified peer IP address.

Prerequisites

BFD has been globally enabled using the bfd command in the system view.

Example

# Change the detection multiplier of a passive BFD session with the peer IP address of 10.1.1.1 to 10.

<HUAWEI> system-view
[~HUAWEI] bfd
[*HUAWEI-bfd] passive-session detect-multiplier 10 peer 10.1.1.1