display pce protocol lsp (All views)

Function

The display pce protocol lsp command displays the LSP DB information reported by the PCC to the PCE server.

The display pce protocol stitch-label command displays the label stitch database information.

Format

display pce protocol lsp [ client pcc-ip-address ] [ symbolic-path-name path-name ]

display pce protocol lsp plsp-id plsp-id-val

display pce protocol lsp initiated-lsp

display pce protocol stitch-label [ label-value ]

Parameters

Parameter	Description	Value
client pcc-ip-address	Specifies a PCC IP address.	The value is in dotted decimal notation.
symbolic-path-name path-name	Specifies the name of an explicit path.	The value is a string of 1 to 255 case-insensitive characters, spaces not supported.
plsp-id plsp-id-val	Specifies a PLSP ID.	The value is an integer that ranges from 1 to 4294967294.
initiated-lsp	Displays information about initiated LSPs,	-
label-value	Specifies a SID.	The value is an integer that ranges from 0 to 4294967295.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
pce	read

Usage Guidelines

Usage Scenario

To check LSP DB information saved on a PCE server, run the display pce protocol lsp command on a PCE client.

To view basic stitching information, run the display pce protocol stitch-label command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display basic information about the stick label on the PCE client.

<HUAWEI> display pce protocol stitch-label 284688
Label               : 284688
Local PLSP-ID       : 1048576
PLSP-ID             : 1
Symbolic Path Name  : Tunnel1
Ingress-LSR-ID      : 10.25.25.25
Egress-LSR-ID       : 10.24.24.24
Tunnel-ID           : 1
Label-State         : UP
Stitch Information
  Segment0[Node]      : Label: 32878, NAI: 10.2.1.1
  Segment1[Adjacency] : Label: 32862, NAI: 10.1.1.1-10.1.1.2
  Segment2[-]         : Label: 328302

# Display LSP DB information saved on a PCE server.

<HUAWEI> display pce protocol lsp
 PCE Client IP Address : 10.1.1.9
 Symbolic Path Name    : tunnel5
 PLSP-ID               : 1
 Ingress-LSR-ID   Egress-LSR-ID    Tunnel-ID LSP-ID Delegate LSP-State
 10.2.3.4         10.3.4.5         5         1      YES      DOWN

**Table 1** Description of the **display pce protocol lsp (All views)** command output
Item	Description
Label	Value of a stitching label.
Local PLSP-ID	Local LSP ID within the PCEP protocol.
PLSP-ID	PCEP ID of an LSP.
Symbolic Path Name	Name of an LSP established over a path that a PCE server calculates.
Ingress-LSR-ID	Ingress LSR ID.
Egress-LSR-ID	LSR ID of the egress.
Tunnel-ID	Tunnel flag.
Label-State	Label status. UP. DOWN.
Stitch Information	Stitching label information. Node: specifies the node label and NAI information. Adjacency: specifies the adjacency label and NAI. -: specifies label information. NAI: specifies the neighbor identifier of a specified node.
PCE Client IP Address	IP address of a PCE client.
LSP-ID	ID of an LSP in a tunnel.
Delegate	LSP delegation status.
LSP-State	LSP status: DOWN. UP. ACTIVE. GOING-DOWN. GOING-UP. RESERVED.