display default-parameter pce protocol

Function

The display default-parameter pce protocol command displays the default PCE protocol configurations.

Format

display default-parameter pce protocol

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
pce	read

Usage Guidelines

Usage Scenario

To view default PCE protocol configurations, run the display default-parameter pce protocol command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the default PCE protocol configurations.

<HUAWEI> display default-parameter pce protocol
Global Information:
 ----------------------------------------------------------
    Keepalive timer(sec)              : 30
    Hold timer(sec)                   : 120
    Delegate timer(sec)               : 30
    State timeout timer(sec)          : 30
    Flush timer to delete LSP(sec)    : --
    Request timer(sec)                : --
    Session preference                : 0
 ----------------------------------------------------------

**Table 1** Description of the **display default-parameter pce protocol** command output
Item	Description
Global Information	Global Information.
Keepalive timer(sec)	Default value of the Keepalive timer of a PCEP session, in seconds.
Hold timer(sec)	Default value of the PCEP session hold timer, in seconds.
Delegate timer(sec)	Default value of the LSP Delegate-hold timer, in seconds.
State timeout timer(sec)	Default value of the LSP state timeout timer, in seconds.
Flush timer to delete LSP(sec)	Default value of the LSP deletion delay timer on the PCE server after the connection between the PCE server and PCE client fails, in seconds. This field is valid only on the PCE server and is displayed as "--" on the PCE client.
Request timer(sec)	Default value of the timer for waiting for a path calculation result from a peer PCE server, in seconds. This field is valid only on the PCE server and is displayed as "--" on the PCE client.
Session preference	Default preference value for a PCEP session.