neighbor-check receive

Function

The neighbor-check receive command enables the IPv6 PIM neighbor check function.

The undo neighbor-check receive command restores the default setting.

By default, the IPv6 PIM neighbor check function is not enabled.

neighbor-check receive

undo neighbor-check receive

Parameter	Description	Value
receive	Checks whether the Join/Prune and Assert messages are received from an IPv6 PIM neighbor. If not, these messages are discarded.	-

Parameter

Description

Value

receive

Checks whether the Join/Prune and Assert messages are received from an IPv6 PIM neighbor. If not, these messages are discarded.

IPv6 PIM view, VPN instance IPv6 PIM view

2: Configuration level

Task Name	Operations
pim	write

Usage Scenario

You can specify both receive and send to enable the IPv6 PIM neighbor check function for the received and sent Join/Prune and Assert messages.

# In the public network instance, enable the IPv6 PIM neighbor check function for the received Join/Prune and Assert messages.

<HUAWEI> system-view
[~HUAWEI] multicast ipv6 routing-enable
[*HUAWEI] pim-ipv6
[*HUAWEI-pim6] neighbor-check receive