The neighbor-check send command enables the IPv6 PIM neighbor check function.
The undo neighbor-check send command restores the default setting.
By default, the IPv6 PIM neighbor check function is not enabled.
neighbor-check send
undo neighbor-check send
IPv6 PIM view, VPN instance IPv6 PIM view
2: Configuration level
Usage Scenario
You can specify both receive and send to enable the IPv6 PIM neighbor check function for the received and sent Join/Prune and Assert messages.
<HUAWEI> system-view [~HUAWEI] multicast ipv6 routing-enable [*HUAWEI] pim-ipv6 [*HUAWEI-pim6] neighbor-check send