port-mode (GE10GE interface view)

Format

port-mode { 1ge | 10ge }

undo port-mode

Parameters

Parameter	Description	Value
1ge	Sets an interface's bandwidth mode to 1 Gbit/s.	-
10ge	Sets an interface's bandwidth mode to 10 Gbit/s.	-

Parameter

Description

Value

1ge

Sets an interface's bandwidth mode to 1 Gbit/s.

-

10ge

Sets an interface's bandwidth mode to 10 Gbit/s.

-

Views

10G LAN interface view, 10G WAN interface view, GE optical interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
device-mgr	write

Usage Guidelines

Usage Scenario

When interconnecting interfaces that require the same bandwidth mode, you can run the port-mode command to set an interface's bandwidth to 1 Gbit/s or 10 Gbit/s.

Prerequisites

The MAC and PHY components of a subcard support switching between 1 Gbit/s and 10 Gbit/s.

Example

# Set GE 0/1/25's bandwidth mode to 1 Gbit/s.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/25
[~HUAWEI-GigabitEthernet0/1/25] port-mode 1GE