port-queue-template

Function

The port-queue-template command creates a port-queue template in the system view.

The undo port-queue-template command deletes a port-queue template in the system view.

By default, no port-queue profile is created in the system view.

Format

port-queue-template port-queue-name

undo port-queue-template port-queue-name

Parameters

Parameter	Description	Value
port-queue-name	Specifies the name of a port-queue template.	The value is a string of 1 to 31 case-sensitive characters, the question mark (?) and space not supported.

Parameter

Description

Value

port-queue-name

Specifies the name of a port-queue template.

The value is a string of 1 to 31 case-sensitive characters, the question mark (?) and space not supported.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

To create a port-queue template in the system view, run the port-queue-template command. You can set scheduling parameters for eight port queues in the template. Configuring and applying a port-queue template to interfaces reduces workload of configuring port queues.

Follow-up Procedure

After the port-queue-template command is run, if the port-queue template specified by port-queue-name does not exist, the system creates a new port-queue template; if the port-queue template specified by port-queue-name exists, the system displays the port-queue template view.

Precautions

You can configure a maximum of 1024 port-queue templates in the system.

After a port-queue profile is used, this template cannot be deleted.

Example

# Create a port-queue template named test.

<HUAWEI> system-view
[~HUAWEI] port-queue-template test