pppoe-motm

Function

The pppoe-motm command configures clock synchronization information for PPPoE users carried in MOTM tags of PADM packet.

The undo pppoe-motm command is used to cancel the configuration.

By default, PADM packets do not contain MOTM tags.

This command is supported only on the NetEngine 8000 F1A.

Format

pppoe-motm motm-value

undo pppoe-motm

Parameters

Parameter	Description	Value
motm-value	Specifies the clock synchronization information for PPPoE users carried in MOTM tags of PADM packets.	The value is a string of 1 to 255 characters.

Parameter

Description

Value

motm-value

Specifies the clock synchronization information for PPPoE users carried in MOTM tags of PADM packets.

The value is a string of 1 to 255 characters.

Views

Virtual template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
pppoebras	write

Usage Guidelines

Usage Scenario

MOTM is a tag in a PADM packet. MOTM tag contains clock information provided by a clock server for end users. After a PPPoE session becomes active, ACs send PADM packets to end users. Terminals synchronize clock information based on information carried in MOTM tags (IP address of the NTP clock server).

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure MOTM information carried in PADM packets to be "ntp1= 1.1.1.1".

<HUAWEI> system-view
[~HUAWEI] interface virtual-template 0
[*HUAWEI-Virtual-Template0] pppoe-motm ntp1=1.1.1.1