pppoe-server ac-name

Function

The pppoe-server ac-name command configures a name for a PPPoE server.

The undo pppoe-server ac-name command deletes a name configured for a PPPoE server.

By default, the name of a PPPoE server is the device's host name.

This command is supported only on the NetEngine 8000 F1A.

Format

pppoe-server ac-name ac-name

undo pppoe-server ac-name ac-name

Parameters

Parameter	Description	Value
ac-name	Specifies a name for a PPPoE server.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Parameter

Description

Value

ac-name

Specifies a name for a PPPoE server.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

Views

Virtual template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
pppoebras	write

Usage Guidelines

Usage Scenario

PPPoE uses the client/server model. A PPPoE client initiates a connection request to a PPPoE server. After a session is established, the PPPoE server provides access control and authentication for the PPPoE client. To help clients identify a PPPoE server, run the pppoe-server ac-name command to configure a name for a PPPoE server.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure abc as the name for a PPPoE server.

<HUAWEI> system-view
[~HUAWEI] interface virtual-template 0
[*HUAWEI-Virtual-Template0] pppoe-server ac-name abc