pppoe-server bind

Function

The pppoe-server bind command binds the VT to the interface on the device through which the user accesses the network.

The undo pppoe-server bind command deletes the VT bound to the interface on the device through which the user accesses the network.

By default, VT0 is bound to the interface on the device through which the user accesses the network.

This command is supported only on the NetEngine 8000 F1A.

Format

pppoe-server bind virtual-template virtual-template-number

undo pppoe-server bind

Parameters

Parameter	Description	Value
virtual-template virtual-template-number	Specifies the number of a VT.	The value ranges from 0 to 1023.

Parameter

Description

Value

virtual-template virtual-template-number

Specifies the number of a VT.

The value ranges from 0 to 1023.

Views

100GE interface view, 10G LAN interface view, 10G WAN interface view, 40GE interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, VE interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
pppoebras	write

Usage Guidelines

Usage Scenario

You need to create a VT before binding it to the interface on the through which the user access the network. You can configure parameters for PPP on the VT.

If the pppoe-server bind command is run more than once in the same view, the latest configuration overrides the previous one.

Configuration Impact

If the pppoe-server bind command is run more than once in the same view, the latest configuration overrides the previous one.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Bind the virtual template to an interface.

<HUAWEI> system-view
[~HUAWEI] interface virtual-template 1
[*HUAWEI-Virtual-Template1] commit
[~HUAWEI-Virtual-Template1] quit
[~HUAWEI] interface Eth-Trunk1
[*HUAWEI-Eth-Trunk1] pppoe-server bind virtual-template 1