ptp-adaptive atr enable

Function

The ptp-adaptive atr enable command enables 1588 ATR on an interface.

The undo ptp-adaptive atr enable command disables 1588 ATR on an interface.

By default, 1588 ATR is disabled on an interface.

Format

ptp-adaptive atr enable

undo ptp-adaptive atr enable

Parameters

None

Views

100GE interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE interface view, GE optical interface view, GE interface view, GE electrical interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
clksync	write

Usage Guidelines

Usage Scenario

To enable 1588 ATR on an interface to improve the time synchronization accuracy, run the ptp-adaptive atr enable command.

This command applies only to 1588 ATR.

Configuration Impact

If 1588 ATR is not enabled on an interface, the time synchronization performance will be affected.

Precautions

This command is supported only by the admin VS.

This command is run on the outbound interface used to transmit 1588 ATR packets.

Example

# Enable 1588 ATR on GE 0/1/0.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] ptp-adaptive atr enable