Usage Scenario
To allow a client to interconnect with a time server in 1588v2 unicast negotiation mode, run the ptp-adaptive atr hop-by-hop command to enable the 1588 ATR client hop-by-hop mode. The client must be directly connected to the time server.
Prerequisites
The ptp-adaptive enable, ptp-adaptive device-type client, and ptp-adaptive time profile commands have been run in the system view.
Precautions
After the 1588 ATR client hop-by-hop mode is configured, the value range of the 1588 ATR clock domain is changed to 0-255. The default value of the 1588 ATR clock domain is 0.