lpt enable

Function

The lpt enable command enables LPT.

The undo lpt enable command disables LPT.

By default, LPT is disabled.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

lpt enable

undo lpt enable

Parameters

None

Views

LPT PTP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
lpt	write

Usage Guidelines

To enable LPT on an interface to which an LPT instance is bound or on which the LPT root node is configured, run the lpt enable command.

Example

# Enable LPT.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] interface GigabitEthernet0/1/1
[*HUAWEI-GigabitEthernet0/1/1] mpls l2vc 1.1.1.1 100
[*HUAWEI-GigabitEthernet0/1/1] quit
[*HUAWEI] lpt ptp interface GigabitEthernet0/1/1
[*HUAWEI-ptplpt-GigabitEthernet0/1/1] lpt enable