qos phb enable vxlan-mode

Function

The qos phb enable vxlan-mode command maps internal priorities of packets entering the VXLAN tunnel to VXLAN DSCP values based on a specific DS PHB table.

The undo qos phb enable vxlan-mode command disables the mapping from internal priorities of packets entering the VXLAN tunnel to VXLAN DSCP values based on a specific DS PHB table.

By default, the VXLAN DSCP value of a packet is the same as its DSCP value.

Format

qos phb enable ds-name vxlan-mode

undo qos phb enable vxlan-mode

Parameters

Parameter	Description	Value
ds-name	Specifies the name of a DS domain.	The value is a string of 1 to 48 case-sensitive characters.

Parameter

Description

Value

ds-name

Specifies the name of a DS domain.

The value is a string of 1 to 48 case-sensitive characters.

Views

VPN instance IPv4 address family view, VPN instance view, Bridge domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

When packets enter a VXLAN tunnel, to maintain the same QoS priorities for packets transmitted on different networks, run the qos phb enable vxlan-mode command. After the qos phb enable vxlan-mode command is run, the system maps internal priorities of packets to VXLAN DSCP values based on a specific DS PHB table.

Prerequisites

The DS domain and VXLAN have been configured.

Example

# Map internal priorities of packets entering the VXLAN tunnel to VXLAN DSCP values based on a specific DS PHB table.

<HUAWEI> system-view
[~HUAWEI] bridge-domain 1
[*HUAWEI-bd1] qos phb enable default vxlan-mode