radius-attribute-format nas-port-id unitary-subslot

Function

The radius-attribute-format nas-port-id unitary-subslot command sets the sub-card type in the subslot field of the NAS-Port-Id attribute.

The undo radius-attribute-format nas-port-id command cancels the default setting.

By default, the sub-card type is not set in the subslot field of the NAS-Port-Id attribute.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute-format nas-port-id unitary-subslot slot slot-id base-number number

undo radius-attribute-format nas-port-id unitary-subslot slot slot-id

Parameters

Parameter	Description	Value
base-number number	Specifies the number of interfaces on the subcard.	The value ranges from 1 to 24.
slot slot-id	Specifies the slot ID of the interface board.	-

Parameter

Description

Value

base-number number

Specifies the number of interfaces on the subcard.

The value ranges from 1 to 24.

slot slot-id

Specifies the slot ID of the interface board.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

After the command is used, the slot number, sub-slot number, and interface number in the format use the code of the single sub-card. For example, if the original code of the board with a sub-board is ETH 0/1/0 to ETH 0/1/3 and ETH 0/1/8 to ETH 0/1/11, after the command is used, the code is converted into ETH 0/1/0 to ETH 0/1/6.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the subslot field in the NAS-Port-Id attribute: the slot ID of the interface board is 1 and the number of interfaces on the subcard is 2.

<HUAWEI> system-view
[~HUAWEI] radius-attribute-format nas-port-id unitary-subslot slot 1 base-number 2