radius-attribute enable framed-ip-netmask account-request

Function

The radius-attribute enable framed-ip-netmask account-request command configures a device to add a 32-bit Framed-IP-Netmask attribute to an Accounting-Request packet.

The undo radius-attribute enable framed-ip-netmask account-request command restores the default configuration.

By default, an Accounting-Request packet does not carry a 32-bit Framed-IP-Netmask attribute.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute enable framed-ip-netmask netmask-length account-request

undo radius-attribute enable framed-ip-netmask netmask-length account-request

Parameters

Parameter	Description	Value
netmask-length	Specifies the length of the Framed-IP-Netmask attribute.	The value is an integer 32, in bits.

Parameter

Description

Value

netmask-length

Specifies the length of the Framed-IP-Netmask attribute.

The value is an integer 32, in bits.

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

If you want to send a 32-bit Framed-IP mask to a RADIUS server, run the radius-attribute enable command to encapsulate the 32-bit Framed-IP mask into a 32-bit Framed-IP-Netmask attribute in an Accounting-Request packet and send the packet to the RADIUS server.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure a device to add a 32-bit Framed-IP-Netmask attribute to an Accounting-Request packet.

<HUAWEI> system-view
[~HUAWEI] radius-server group group1
[*HUAWEI-radius-group1] commit
[~HUAWEI-radius-group1] radius-attribute enable framed-ip-netmask 32 account-request