radius-attribute framed-route netmask-limit

Function

The radius-attribute framed-route netmask-limit low command configures the minimum mask length for the Framed-Route attribute.

The undo radius-attribute framed-route netmask-limit low command restores the default configuration.

By default, the minimum mask length of the Framed-Route attribute (No. 22 RADIUS attribute) is 0, indicating that the device can parse the Framed-Route attribute with any mask length.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute framed-route netmask-limit low netmask-value

undo radius-attribute framed-route netmask-limit low

Parameters

Parameter	Description	Value
netmask-value	Specifies a mask length.	The value is an integer ranging from 0 to 32.

Parameter

Description

Value

netmask-value

Specifies a mask length.

The value is an integer ranging from 0 to 32.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

The RADIUS server delivers the Framed-route attribute in authentication response packets. If the mask length of the Framed-Route attribute delivered in the authentication response packets is less than the configured mask length, the device considers the attribute delivered by the RADIUS server invalid and does not parse the attribute. In this case, users go online normally.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the minimum mask length for the Framed-Route attribute to 10.

<HUAWEI> system-view
[~HUAWEI] radius-attribute framed-route netmask-limit low 10