The radius-attribute hw-domain-name block command configures an access policy for users if the domain delivered by the RADIUS server is blocked.
The undo radius-attribute hw-domain-name block command deletes the configuration.
By default, when the domain delivered by the RADIUS server is blocked, users can go online through this domain but cannot perform other operations.
This command is supported only on the NetEngine 8000 F1A.
Usage Scenario
When RADIUS authentication is configured for users, the users preferentially access through the domain delivered by the RADIUS server. By default, when the domain delivered by the RADIUS server is blocked, users can go online through this domain but cannot perform other operations. To prevent this situation, run the radius-attribute hw-domain-name block offline command in the RADIUS server group view so that new access users cannot go online through the domain delivered by the RADIUS server if the domain is blocked.
Configuration Impact
This command takes effect only for subsequent access users.
<HUAWEI> system-view [~HUAWEI] radius-server group huawei [*HUAWEI-radius-huawei] commit [~HUAWEI-radius-huawei] radius-attribute hw-domain-name block offline