radius-attribute hw-acct-terminate-subcause encapsulation-type

Function

The radius-attribute hw-acct-terminate-subcause encapsulation-type command configures an encapsulation type of the HW-Acct-Terminate-Subcause attribute.

The undo radius-attribute hw-acct-terminate-subcause encapsulation-type command restores the default configuration.

By default, the HW-Acct-Terminate-Subcause attribute is encapsulated as an integer.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute hw-acct-terminate-subcause encapsulation-type { string | integer }

undo radius-attribute hw-acct-terminate-subcause encapsulation-type { string | integer }

Parameters

Parameter	Description	Value
string	Encapsulates the HW-Acct-Terminate-Subcause attribute as a character string.	-
integer	Encapsulates the HW-Acct-Terminate-Subcause attribute as an integer.	-

Parameter

Description

Value

string

Encapsulates the HW-Acct-Terminate-Subcause attribute as a character string.

integer

Encapsulates the HW-Acct-Terminate-Subcause attribute as an integer.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-radius	write

Usage Guidelines

Huawei proprietary attribute HW-Acct-Terminate-Subcause is used to identify the number of a session interruption subcause. After the radius-attribute include HW-Acct-terminate-subcause [ edsg ] command is run in the RADIUS server group view, the Accounting-Stop messages that the device sends to the RADIUS server carry this attribute. To configure an encapsulation type of the HW-Acct-Terminate-Subcause attribute on the device for interworking with a server, run the radius-attribute hw-acct-terminate-subcause encapsulation-type command.

Example

# Configure the device to encapsulate the HW-Acct-Terminate-Subcause attribute as a character string.

<HUAWEI> system-view
[~HUAWEI] radius-attribute hw-acct-terminate-subcause encapsulation-type string