radius-attribute include nas-port lns with-user-id

Function

The radius-attribute include nas-port lns with-user-id command enables an LNS or LTS to encapsulate user IDs into accounting packets to be sent to the RADIUS server.

The undo radius-attribute include nas-port lns with-user-id command restores the default configuration.

By default, an LNS or LTS does not encapsulate user IDs into accounting packets to be sent to the RADIUS server.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute include nas-port lns with-user-id accounting-request

undo radius-attribute include nas-port lns with-user-id accounting-request

Parameters

None

Views

RADIUS server group view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

To enable an LNS or LTS to encapsulate a user ID into the NAS-Port attribute in an accounting packet to be sent to the RADIUS server, run the radius-attribute include nas-port lns with-user-id command.

Example

# Enable an LNS to encapsulate a user ID into the NAS-Port attribute in an accounting packet to be sent to the RADIUS server.

<HUAWEI> system-view
[~HUAWEI] radius-server group huawei
[*HUAWEI-radius-huawei] radius-attribute include nas-port lns with-user-id accounting-request