radius-attribute tunnel-password

Function

The radius-attribute tunnel-password command sets the mode in which the RADIUS server sends a tunnel password to simple text or cipher on the device.

The undo radius-attribute tunnel-password command restores the default setting.

By default, the RADIUS server sends a tunnel password in cipher mode.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute tunnel-password { cipher | simple }

undo radius-attribute tunnel-password

Parameters

Parameter	Description	Value
cipher	Sets the mode in which the RADIUS server sends a tunnel password to cipher.	-
simple	Sets the mode in which the RADIUS server sends a tunnel password to simple text.	-

Parameter

Description

Value

cipher

Sets the mode in which the RADIUS server sends a tunnel password to cipher.

simple

Sets the mode in which the RADIUS server sends a tunnel password to simple text.

Views

RADIUS server group view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
bras-radius	write

Usage Guidelines

Usage Scenario

The device supports either of the following modes in which the RADIUS server sends a tunnel password: simple text or cipher. The mode configured on the device needs to be the same as the mode in which the RADIUS server sends a tunnel password.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Set the mode in which the RADIUS server sends a tunnel password to cipher text.

<HUAWEI> system-view
[~HUAWEI] radius-server group rd1
[*HUAWEI-radius-rd1] commit
[~HUAWEI-radius-rd1] radius-attribute tunnel-password cipher