radius-attribute vendor

Function

The radius-attribute vendor continuous command enables the device to carry multiple proprietary attributes in RADIUS attribute 26.

The undo radius-attribute vendor continuous command enables the device to carry only one proprietary attribute in RADIUS attribute 26.

By default, the device to carry multiple proprietary attributes in RADIUS attribute 26 is enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-attribute vendor { { huawei | microsoft | 3gpp2 | redback | dslforum | other } ^* | { all } } continuous

undo radius-attribute vendor { { huawei | microsoft | 3gpp2 | redback | dslforum | other } ^* | { all } } continuous

Parameters

Parameter	Description	Value
huawei	Indicates the Huawei proprietary attribute.	-
microsoft	Indicates the Microsoft proprietary attribute.	-
3gpp2	Indicates the 3GPP2 proprietary attribute.	-
redback	Indicates the RedBack proprietary attribute.	-
dslforum	Indicates the DSLForum proprietary attribute.	-
other	Indicates the other proprietary attributes except the Huawei proprietary attribute, the Microsoft proprietary attribute, the 3GPP2 proprietary attribute, the RedBack proprietary attribute and the DSLForum proprietary attribute.	-
all	Indicates all the proprietary attribute.	-
continuous	Enables RADIUS attribute 26 to carry multiple proprietary attributes.	-

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

To allow the device to connect to a non-Huawei RADIUS server that cannot parse consecutive proprietary attributes in packets, run the radius-attribute vendor continuous command to enable the device to carry multiple proprietary attributes in RADIUS attribute 26.

Configuration Impact

After the radius-attribute vendor continuous command is used on the , RADIUS attribute 26 carries multiple proprietary attributes in a packet sent to the non-Huawei RADIUS server.

If the radius-attribute vendor continuous command is run more than once, the latest configuration does not override previous one.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable RADIUS attribute 26 to carry multiple Huawei proprietary attributes.

<HUAWEI> system-view
[~HUAWEI] radius-server group huawei
[*HUAWEI-radius-huawei] commit
[~HUAWEI-radius-huawei] radius-attribute vendor huawei continuous