radius-server cache keep packet

Function

The radius-server cache keep packet command disables the device from deleting cached accounting packets after the number of retransmissions reaches the specified upper limit.

The undo radius-server cache keep packet command restores the default configuration.

By default, cached accounting packets are deleted after the number of retransmissions reaches the specified upper limit.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server cache keep packet

undo radius-server cache keep packet

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-radius	write

Usage Guidelines

Usage Scenario

After the function to cache accounting packets is enable on a device, if the device is disconnected from the RADIUS server during the user login process, accounting packets are cached. By default, cached accounting packets are deleted after the number of retransmissions reaches the specified upper limit. To disable the device from deleting cached accounting packets after the number of retransmissions reaches the specified upper limit, run the radius-server cache keep packet command.

Prerequisites

The function to cache accounting packets has been enabled.

Precautions

In VS mode, this command is supported only by the admin VS.

After this command is run, the packets that are being retransmitted exceed the maximum number of retransmission times and are stored in the accounting cache. In addition, other packets in the accounting buffer are not sent. After the RADIUS server recovers, run the radius-server cache resend packet command to send the packets whose number of retransmission times exceeds the maximum. Then, other packets in the accounting cache can be retransmitted.

Example

# Disable the function to delete cached accounting packets after the number of retransmissions reaches the specified upper limit.

<HUAWEI> system-view
[~HUAWEI] radius-server cache keep packet