radius-server coa-request hw-policy-name daa coexist-with-user

Function

The radius-server coa-request hw-policy-name daa coexist-with-user command allows the user attributes also to take effect if they are delivered with a DAA template in the HW-Policy-Name (26-95) attribute through the same CoA message which may also carry other DAA service attributes.

The undo radius-server coa-request hw-policy-name daa coexist-with-user command restores the default configuration.

By default, if both user attributes and DAA service attributes are delivered through the same CoA message, the device does not process the user attributes.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server coa-request hw-policy-name daa coexist-with-user

undo radius-server coa-request hw-policy-name daa coexist-with-user

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

To allow the user attributes also to take effect if they are delivered with a DAA template in the HW-Policy-Name (26–95) attribute through the same CoA message which may also carry other DAA service attributes, run the radius-server coa-request hw-policy-name daa coexist-with-user command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Allow the user attributes also to take effect if they are delivered with a DAA template in the HW-Policy-Name (26-95) attribute through the same CoA message which may also carry other DAA service attributes.

<HUAWEI> system-view
[~HUAWEI] radius-server coa-request hw-policy-name daa coexist-with-user