radius-server coa-request hw-policy-name daa same-policy

Function

The radius-server coa-request hw-policy-name daa same-policy reply-ack command enables a device to reply with an ACK message when the RADIUS server uses a CoA message's HW-Policy-Name (26-95) attribute to deliver the same DAA service policy as that configured on the device in uniform accounting scenarios.

The undo radius-server coa-request hw-policy-name daa same-policy reply-ack command restores the default configuration.

By default, a device is enabled to reply with an NAK message when the RADIUS server uses a CoA message's HW-Policy-Name (26-95) attribute to deliver the same DAA service policy as that configured on the device in uniform accounting scenarios.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server coa-request hw-policy-name daa same-policy reply-ack

undo radius-server coa-request hw-policy-name daa same-policy reply-ack

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

In a uniform accounting scenario, if the HW-Policy-Name (26-95) attribute name that the RADIUS server uses a CoA message to deliver is the same as the DAA service policy name in a domain, the device replies with an NAK message. To enable the device to reply with an ACK message in this scenario, run the radius-server coa-request hw-policy-name daa same-policy reply-ack command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable a device to reply with an ACK message when the RADIUS server uses a CoA message's HW-Policy-Name (26-95) attribute to deliver the same DAA service policy as that configured on the device in uniform accounting scenarios.

<HUAWEI> system-view
[~HUAWEI] radius-server coa-request hw-policy-name daa same-policy reply-ack