radius-server format-attribute calling-station-id user-defined

Function

The radius-server format-attribute calling-station-id user-defined command configures an encapsulation format for the Calling-Station-Id attribute.

The undo radius-server format-attribute calling-station-id command deletes the configured encapsulation format for the Calling-Station-Id attribute.

By default, no encapsulation format is specified for the Calling-Station-Id attribute.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server format-attribute calling-station-id user-defined version3

undo radius-server format-attribute calling-station-id

Parameters

Parameter	Description	Value
version3	The Calling-Station-Id attribute is generated in the following format: {lag-Trunkid\|eth Slot/Subslot/Port}:Pvlan.Cvlan#SystemName###pppoe mac-address#. Slot specifies a slot ID, Subslot specifies a sub-slot ID, and Port specifies a port number. Pvlan specifies an outer VLAN ID, Cvlan specifies an inner VLAN ID. If no VLAN exists, Pvlan and Cvlan are set to 0. mac-address specifies a physical address. The value of mac-address is separated by a semicolon (:). The other fields are fixed.	-

Views

RADIUS server group view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Different RADIUS servers have different requirements for attribute formats. To configure a device to encapsulate the Calling-Station-Id attribute in the version3 format, run the radius-server format-attribute calling-station-id user-defined version3 command.

Example

# Configure the device to encapsulate the Calling-Station-Id attribute in the version3 format.

<HUAWEI> system-view
[~HUAWEI] radius-server group group1
[*HUAWEI-radius-group1] commit
[~HUAWEI-radius-group1] radius-server format-attribute calling-station-id user-defined version3