radius-server format-attribute include sub-slot

Function

The radius-server format-attribute include sub-slot command enables the system to use the interface number format of slot number/sub-slot number/interface number in the calling-station-ID and NAS-port-ID attributes.

The undo radius-server format-attribute include sub-slot command enables the system to use the interface number format of slot number/interface number in the calling-station-ID and NAS-port-ID attributes.

The default interface number format is slot number/interface number in the calling-station-ID and NAS-port-ID attributes.

This command is supported only on the NetEngine 8000 F1A.

Format

radius-server format-attribute include sub-slot

undo radius-server format-attribute include sub-slot

Parameters

None

Views

RADIUS server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

The radius-server format-attribute include sub-slot command is used to select the interface number format of slot number/sub-slot number/interface number in the calling-station-ID and NAS-port-ID attributes, as required by a RADIUS server.

Configuration Impact

After the radius-server format-attribute include sub-slot command is run, the calling-station-ID and NAS-port-ID attributes in the RedBack format contain the interface number in the format of slot number/sub-slot number/interface number.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Use the interface number format of slot number/sub-slot number/interface number in the calling-station-ID and NAS-port-ID attributes.

<HUAWEI> system-view
[~HUAWEI] radius-server group group1
[*HUAWEI-radius-group1] commit
[~HUAWEI-radius-group1] radius-server format-attribute include sub-slot