recycle reserved ipv6-prefix

Function

The recycle reserved ipv6-prefix command reclaims all the IPv6 prefixes reserved in the IPv6 prefix pool.

This command is supported only on the NetEngine 8000 F1A.

Format

recycle reserved ipv6-prefix

Parameters

None

Views

IPv6 prefix pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipv6pool	write

Usage Guidelines

Usage Scenario

Enter the IPv6 delegation prefix pool view and run the recycle reserved ipv6-prefix command to reclaim all the IPv6 prefixes reserved in the address pool. After that, no reserved prefix exists in the prefix pool view.

Configuration Impact

If a user is online, running this command may cause the user to go offline temporarily.

Precautions

In VS mode, this command applies only to the admin VS.

Example

# Reclaim all reserved IPv6 prefixes in the IPv6 prefix pool.

<HUAWEI> system-view
[~HUAWEI] ipv6 prefix pd delegation
 Info: Create a prefix pool.
[*HUAWEI-ipv6-prefix-pd] commit
[~HUAWEI-ipv6-prefix-pd] recycle reserved ipv6-prefix