reflect between-clients (BGP-EVPN address family view)

Function

The reflect between-clients command enables route reflection among clients through the RR.

The undo reflect between-clients command disables route reflection among clients through the RR.

By default, route reflection among clients through the RR is enabled.

Format

reflect between-clients

undo reflect between-clients

Parameters

None

Views

BGP-EVPN address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

On some networks, if the clients of an RR establish full-mesh connections with each other, they can directly exchange routing information. Route reflection among clients through the RR is unnecessary. The undo reflect between-clients command can be used to prohibit the clients from reflecting routes to each other to reduce costs.

Prerequisites

An RR has been configured.

Precautions

The reflect between-clients command is run only on RRs.

Example

# Disable route reflection among fully-meshed clients through the RR in the BGP-EVPN address family view.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] peer 1.1.1.1 as-number 100
[*HUAWEI-bgp] l2vpn-family evpn
[*HUAWEI-bgp-af-evpn] peer 1.1.1.1 enable
[*HUAWEI-bgp-af-evpn] peer 1.1.1.1 reflect-client
[*HUAWEI-bgp-af-evpn] undo reflect between-clients