release-agent

Function

The release-agent command enables the function of sending DHCPv6 Release packets.

The undo release-agent command disables the function of sending DHCPv6 Release packets.

By default, the function of sending DHCPv6 Release packets is enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

release-agent

undo release-agent

Parameters

None

Views

DHCPv6 server group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dhcp	write

Usage Guidelines

Usage Scenario

In the following situations, the release-agent command can be run to configure the device to send DHCPv6 Release packets to the server:

The device that provides the DHCPv6 relay agent functionality, not the client, needs to directly send Release packets to the DHCP server.
The client cannot send Release packets to the DHCPv6 server.

Configuration Impact

If the function of sending DHCPv6 Release packets is enabled, the device will automatically send a DHCPv6 Release packet to the DHCPv6 server when detecting that a user is offline.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Disable the function of sending DHCPv6 Release packets on a DHCPv6 server group named remote.

<HUAWEI> system-view
[~HUAWEI] dhcpv6-server group remote
[*HUAWEI-dhcpv6-server-group-remote] undo release-agent